Fiberlock IAQ 6100 Mold Resistant Clear Coating
Coverage: 200-600 sq ft per gallon

Goes on white, dries clear

Contains EPA-registered anti-microbials

10 year warranty

Qualifies for LEED® EQ Credit 4.2
IAQ 6100 is a clear mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film.

This durable, flexible, permeable, 100% acrylic water-based semi-gloss coating applies white so the user can ensure complete and thorough application, and then dries to a clear finish. The clear coating allows surfaces to retain their natural look and permit future visual inspection of the coated surfaces.

IAQ 6100 has been tested by independent and certified laboratories to prove resistance to mold growth on the surface of the coating, and has successfully passed ASTM G-21 mold resistance testing with the highest scores possible.

IAQ 6100 is recommended to deter mold growth on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal. IAQ 6100 can also be used on new structural materials to help prevent mold growth during building construction.

NOT FOR USE IN HVAC SYSTEMS/COMPONENTS

Fiberlock IAQ 6100 does not contain any compounds with toxic metals such as barium, boron or zinc, which are present in other mold-resistant coatings.

PROPERTIES:

Product Specifications:
� Solids by Weight � 2%: 28.8%
� Solids by Volume � 2%: 25.8%
� Viscosity at 70�F: 85-90 Kreb Units
� Specular Gloss: 44� � 3 @ 60�
� Flash Point: Non-combustible
� Shelf Life: at 70�F, 36 months minimum (in original factory sealed containers)
� Weight Per Gallon � 0.5 lbs: 8.7 lbs/gal
� Calculated VOC: 90 grams/liter (IAQ 6100 complies with the requirements for LEED� EQ Credit 4.2, low-emitting materials: paints and coatings.)

Coverage:
� Hard, Non-Porus Surfaces 350-600 ft2/gal
� Porous Surfaces: 250-400 ft2/gal

Drying Times (@ 70 - 77�F , 50% R.H.):
� To Touch: 1 hours
� To Recoat: 4-8 hours

Product Testing:
Fungal Resistance: ASTM G-21
     Rating: 0 (No Growth)
Water Vapor Permeance: 4.6 perms