Fiberlock IAQ 7500 Duct Liner Adhesive Coating/Encapsulant  

For use on Fiberglass Duct/Duct Liners

Coverage: 100-200 sq ft per gallon

Goes on white, dries clear

Contains EPA-registered fungicide
Fiberlock IAQ 7500 is a quick-drying, water-based adhesive coating/encapsulant for use on duct liner insulation surfaces. Fiberlock IAQ 7500 dries to form a durable, flexible, moisture-resistant protective coating on the duct liner insulation material.

Fiberlock IAQ 7000 dries to form a durable, flexible, moisture-resistant protective coating on the duct liner insulation material. Its semi-gloss finish minimizes dirt build up on the coating surface which provides nutrients that feed mold colonies. Fiberlock IAQ 7000 also contains an EPA-registered fungicide to resist mold growth on the cured film surface.

Fiberlock IAQ 7000 can be used in residential, commercial or industrial facilities requiring maximum moisture and mold resistance. Fiberlock IAQ 7000 is acceptable for use over faced or unfaced fiberglass duct liner insulation, and unfaced fiberglass duct board insulation.

Successfully tested to ASTM standard C-411 �Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation.� ASTM E-84 Class �A� fire rating. Meets requirements of NFPA 90A/90B standard.

PROPERTIES:

� Solids by Weight: 53 +/-2%
� Volatile: Water
� Flash point: Non-combustible
� Odor: Applied indoors, virtually odorless
� Finish: Moderate gloss
� Water resistance of dry film: Excellent
� Film Flexibility: Excellent
� Film Hardness: Excellent
� Impact Resistance: Excellent
� Average particle size: 0.2 microns
� Weight per gallon: 9.5 +/- 0.2 lbs
� Viscosity: 60-65 KU
� Dry Time: 1-2 hours
� Coverage:
  Smooth surfaces: 100-200 ft2/gal
  Porous surfaces: depends on porosity
� Shelf life at 77�F: 36 months min. in original factory sealed containers
� ASTM E84: Class "A"
  Flame Spread: 10
  Smoke Developed: 5
� ASTM C411: Passed