Fiberlock IAQ 8000 Duct Liner Insulation Sealer-Basecoat  
For use on lined and/or unlined duct work

Coverage: 75-175 sq ft per gallon

Goes on white, dries white

Contains EPA-registered fungicide
Fiberlock IAQ 8000 is a dual-purpose, high performance coating designed to penetrate and reinforce duct liner or duct board insulation materials. It can also be used to seal unlined duct work to prevent microbial particulate from becoming airborne.

Fiberlock IAQ 8000 is a non-flammable, water-based formulation that forms a flexible membrane in duct liner insulation materials. Fiberlock IAQ 8000 is high in viscosity to provide maximum binding ability on insulation materials.

Fiberlock IAQ 8000 is manufactured from premium acrylic resins to allow for optimal durability and flexibility, necessary for air duct environments. Fiberlock IAQ 8000 contains an EPA-registered fungicide to prevent mold from growing on the surface of the cured film.

Successfully tested to ASTM standard C- 411 �Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation.� ASTM E-84 Class �A� fire rating. Meets requirements of NFPA 90A/90B standard.

PROPERTIES:

� Solids by weight: 52 +/-2%
� Volatile: Water
� Average particle size: 0.2 microns
� Viscosity at 77�F: 110-120 KU
� Weight per gallon at 77�F: 10.2 lbs
� Film Hardness: Excellent
� Film Flexibility: Excellent
� Impact Resistance: Excellent
� Water resistance dry film: Excellent
� Bridging effectiveness: Excellent
� Application:
   Brush, roll
   Airless Spray settings:
     Pressure: 3000 PSI
     Hose length: 50 feet
     Hose diameter: 1/4 inch
     Tip size: .017 - .023
     Fan size: 12 inches
� Flash point: Non-combustible
� Dry Time: 1 - 2 hours
� Shelf Life at 77�F: 36 months min (original factory sealed containers)
� Odor: Indoors, virtually odorless